Should I use hard or soft grads?

This depends on: the type of photography, the type of equipment, and the requirements of an individual situation. There is no simple answer, most professionals will carry a selection of both. Hard Grads tend to be used on smaller format cameras (DSLR or 35mm) and are used for general landscape shots with a definite horizon. Soft Grads tend be used on larger format cameras or on very wide angle lenses and are used for balancing exposure evenly, when there is no definite horizon i.e. in cities or other situations when you may have an uneven skyline.

Camera

  1. 02 - Why do I have to wait for my LEE Camera Filters? What are your current lead times.
  2. Big Stopper - Blue cast?
  3. Can I use a polariser & coloured filters together?
  4. Can I use a polariser and ND grad in the filter holder?
  5. Can I use filters on a digital compact?
  6. Can I use my existing screw in polariser with the LEE Filter Holder?
  7. Can I use the LEE System on 617 cameras ?
  8. Can I use the LEE system on a Canon 17mm TSE lens?
  9. Can I use the LEE System on my Rangefinder camera?
  10. Can I use the system on my Hasselblad CF 40mm?
  11. Can my scratched Resin Filters be polished?
  12. Can you make filters with two colours (i.e. ND & warm up)?
  13. Can you produce a colour temperature filter as a grad?
  14. Can you supply grad filters for Black & White photography ?
  15. Do LEE make a filter for infra red photography?
  16. Do LEE make centre ND filters, for wide angle lenses?
  17. Do the bayonet adaptor rings fit the inner or outer bayonet?
  18. Do you have a lens cap for your system?
  19. How can I use Grad filters on my rangefinder camera?
  20. How do I clean my Polyester Filters?
  21. How do I clean my Resin Filters?
  22. How do I mount polyester filters in the plastic frames?
  23. How do I store LEE resin filters?
  24. How many filters can I use before the image quality suffers?
  25. How much exposure compensation do I give Grad Filters?
  26. How wide will the LEE Filter System go without vignetting?
  27. I have lost the brass finger bolt / wedge / spring from my holder – help?
  28. I use SLR, Medium and Large Format cameras, does LEE have a system that can be used on all three?
  29. If I had to buy just one filter, which would you recommend?
  30. My lens has a built in “petal type” lens hood, can I use a filter holder?
  31. My lens has a non standard fitting – How can I use the LEE System?
  32. Polariser ring 105mm - longer screws needed?
  33. Should I use hard or soft grads?
  34. What do I need to get started using filters?
  35. What does 0.3, 0.6 etc. mean?
  36. What filter sizes do LEE make?
  37. What is a blender filter?
  38. What is a stop?
  39. What is the 100mm Push On Filter Holder?
  40. What is the difference between a Linear & Circular polariser?
  41. What is the difference between Resin, Polyester & Glass filters?
  42. What’s the difference between hard and soft grads?
  43. When should I use a wide angle adaptor ring?
  44. Where can I buy your photographic products?
  45. Where is my nearest Camera Filter dealer?
  46. Which lens hood should I choose?
  47. Why can I not get a Long exposure filter or a Polariser for the SW150 system?
  48. Why can’t I use a lens hood with my polariser?
  49. Why is 82mm the largest Wide Angle Adaptor Ring?
  50. Will a Wide Angle Adpaptor Ring work on any lens?
  51. Will the SW150 system fit my ............?
  52. Seven5 or RF75?
  53. Faulty Big or Little Stopper?
  54. Inspiring Professional Book 1 & 2
  55. Do LEE make a system for the Zeiss 15mm?
  56. Medium Wide / Universal Hood
  57. SW 150 Kit / extra slots / slides / filters
  58. Cleaning of the Microfibre Cloth

Feedback and Knowledge Base